S202 Wagon [Archive] - 9&3.net

wgnths

08-26-2008, 07:52 PM

along with the motor, we'll have an exedy twin-disc, moroso oil pan, accusump, oil cooler, kevlar timing belt, possibly a split fuel rail and ia performances wiring harness to use the avcs.

my current 18g will be powering the setup for a little while. then goodspeed will build the twin-scroll 35r kit, with reverse manifold.

i want to get the car ready for november and tested, and get the fenders cut for the bigger tires as a priority. should still be pretty quick with the 18g.

Soup's Sti

08-27-2008, 03:08 PM

So is this what we can expect from the new package, minus the ending

http://videos.streetfire.net/video/SUBARU-TIMEATTACK-inboard_173568.htm

moxie

08-28-2008, 08:24 AM

Kinda slow, but not bad.

wgnths

08-28-2008, 09:00 PM

yeah...no. i need a sequential tranny though.

joebud

08-29-2008, 06:49 AM

I will look into it.

moxie

08-29-2008, 02:57 PM

I have a feeling Joe isn't kidding...

wgnths

08-29-2008, 07:56 PM

zee motor haz arrived...with no ecu.

Soup's Sti

08-30-2008, 10:04 AM

dam those people in customs..cant trust anyone...what are you gonna use instead?

joebud

08-30-2008, 11:55 AM

We'll get one.

pickinicholas

09-03-2008, 03:32 PM

Is the S202 ECU different then a Version 7 or 8 ecu? I have a spare JDM ECU sitting in my garage...

joebud

09-03-2008, 03:53 PM

Is the S202 ECU different then a Version 7 or 8 ecu? I have a spare JDM ECU sitting in my garage...

Thanks Nick, I think we will be ok.

We did some checking on this engine just to see what we have. As far as we can tell it is a ver. 7 S202. My supplier has another ECU if they can't find this one. The S202 ECU has a 'special' file inside so we would like to stay with that.

pickinicholas

09-03-2008, 03:55 PM

Ok, I do have a spare Ver7 ECU if you need it... I think it's a Ver7-spec C ECU. Just an option.

Max Power

09-03-2008, 06:54 PM

I hear AEM's work well :)

wgnths

09-05-2008, 11:03 AM

I hear AEM's work well :)

shut up!

the ecu was suppose to be in another box, but is floating around somewhere.

moroso pan is here, we have a moroso accusump coming, cosworth oil pump and all the lines and fittings will be black.

RufusAZ

09-05-2008, 01:56 PM

all the lines and fittings will be black.

To match the oil leaking out?

Just kidding, Erin (and Joe).

wgnths

09-11-2008, 05:03 PM

lets see some pics

moxie

09-11-2008, 05:18 PM

Yes!

We demand pics!

Max Power

09-13-2008, 05:05 PM

Hey Joe, you should buy this... http://www.azawd.org/forums/viewtopic.php?t=9195&postdays=0&postorder=asc&start=0

http://forums.pelicanparts.com/showthread.php?t=357151&highlight=Subaru

Would be a cool shop car.

joebud

09-13-2008, 05:50 PM

Here are some pics of the build.

The first one shows the Cosworth oil control baffle with the Moroso oil pick up tube. Look at the size of the screen area.
The second is a shot with the Moroso pan on.
Next is the Cosworth pump with the kevlar timing belt.
Then the pan is on.
Finally the Exedy twin plate clutch.

There are a few things I need to do in the engine bay then we will drop it in.

More pics to come

joebud

09-13-2008, 05:53 PM

Max Power

09-13-2008, 06:18 PM

True... guess you don't need the beauty of already almost done - and well.

I'd make that into an NA screamer... big nasty cams, super high compression, spend some money on the valvetrain/heads/manifold, maybe some ITB's too. It sure would suck from a driveability standpoint but it'd be a blast.

moxie

09-15-2008, 03:25 PM

It sure would suck from a driveability standpoint but it'd be a blast.

Wait? You drive your modified cars?

No way!

wgnths

09-15-2008, 08:15 PM

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7136.jpg

just about ready to drop in...if moroso didnt send some goofy billet, hot rod dipstick.

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7137.jpg

rare s202 turbo inlet. apparently these things sell for $1k in japan.

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7145.jpg

Aeromotive fuel rails

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7142.jpg

Exedy twin-disc clutch

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7141.jpg

Moroso Oil pan

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7140.jpg

moxie

09-16-2008, 10:07 AM

lookin good man

I want to see the awesome dipstick.

wgnths

09-16-2008, 08:13 PM

lookin good man

I want to see the awesome dipstick.

it basically looks like one of these effin things

http://www.jegs.com/images/photos/13540120.jpg

Max Power

09-17-2008, 06:12 AM

Erin, you have a sexy dipstick.

joebud

09-17-2008, 07:04 AM

Fear not, I found you a jewel encrusted dipstick for a little extra bling.

wgnths

09-29-2008, 09:39 PM

body shop has been working on the flares and tonight we went over where we want the cutting and fitment. and i've decided to repaint the whole car the same color but in a flat finish.

Also, the motor is in and started today. just a few things to finish it up.

here's how the 17x9s and 255's fit before the flare work.
http://img.photobucket.com/albums/v304/spoolnv/wagon/0929081825.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/0929081826.jpg

kev

09-30-2008, 07:22 PM

Custom flared fenders give me a chubby!

Can't wait to see the after pics!

J0oftheworld

10-01-2008, 02:16 AM

Flat.. teh secks

wgnths

10-02-2008, 11:10 AM

Flat.. teh secks

yeah the sample looked good. same color with no shine. should be a little different.

wgnths

10-10-2008, 11:25 PM

some updates...

Flares are on but they still need some tweaking for fitment. need to cut the front bumper where we moved them forward for clearance.

the car is super dirty and hasnt been washed since it came out of paint. the lighting makes it hard to see how flat the paint is, but it's base psm with a matte clearcoat.

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7157.jpg

added apr mirrors again for a little less drag
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7164.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7169.jpg

Perrin rear diff cover. more capacity, better cooling
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7174.jpg

monster APS 3.5" turbo-back
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7171.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7175.jpg

view of BEATRUSH subframe and MOROSO oil pan
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7205.jpg

you can see where the front bumper needs to be cut and a portion at the rear. we cut more out of the front area of the fender, moving the flares forward where clearance was most needed.
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7160.jpg

wgnths

10-10-2008, 11:27 PM

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7179.jpg

front
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7198.jpg

rear
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7199.jpg

18x9 +35 rota g-forces showed up today. running 255 or 265/35 R888's. Can definitely fit a 275 with the right offset.

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7208.jpg

Also, the s202 motor is up and running a base map. tuning should be finished soon. Installing the Moroso oil accumulator(accusump), Greddy oil. Waiting for the DSS aluminum driveshaft to show up. Getting there!

Max Power

10-11-2008, 01:12 PM

now you'll need more spring in the KW's! :p

Looks good... may stop in there today to give it a looks over.

crzyjulius

10-11-2008, 04:06 PM

Gorgeous!!!

wgnths

10-11-2008, 06:09 PM

now you'll need more spring in the KW's! :p

Looks good... may stop in there today to give it a looks over.

im ordering the stiffest they have for the front, which is only another 100lbs. time for some ohlins or something.

wgnths

10-16-2008, 07:49 PM

http://img.photobucket.com/albums/v304/spoolnv/1016081610a.jpg

http://img.photobucket.com/albums/v304/spoolnv/1016081610.jpg

RufusAZ

10-16-2008, 08:00 PM

Nice. Are you gunna get the scoop painted?

wgnths

10-16-2008, 08:38 PM

nope, gonna leave it. they painted the stocker since i forgot to bring this one down. but it has the cf mirrors now and the new goodspeed logo has a big black stripe.

RufusAZ

10-17-2008, 04:58 AM

Ah, cool. That will bring it all together.

sdkim7

10-17-2008, 07:06 AM

Car looks awesome! What kind of coilovers do you have on there now?

wgnths

10-17-2008, 08:10 AM

same race-comp engineering, tarmac 2's. same as alex.

sdkim7

10-17-2008, 08:48 AM

Those are nice, I need to get me a set of those for sure. Are you doing anything to your tranny? I think the last time I talked to you, you were thinking about putting a 6-speed in?

wgnths

10-17-2008, 10:57 AM

Those are nice, I need to get me a set of those for sure. Are you doing anything to your tranny? I think the last time I talked to you, you were thinking about putting a 6-speed in?

wait a little while and mine will be for sale lol. i need an upgrade to compete.

tranny wise...no 6spd because i did the diffs are 5spd specific. probably due ppg gears.

RufusAZ

10-17-2008, 03:51 PM

wait a little while and mine will be for sale lol. i need an upgrade to compete

That's all Songgi needs is divorce leading temptation.

I think they did same changes to the Tarmac's 2 valving on the newer sets that allows for even more a selection of spring rates. I'm not sure though but I swear i read it somewhere. I'm a n00b at all that. Right now, i'm just running the standard 500/400 rates.

wgnths

10-18-2008, 09:20 AM

That's all Songgi needs is divorce leading temptation.

I think they did same changes to the Tarmac's 2 valving on the newer sets that allows for even more a selection of spring rates. I'm not sure though but I swear i read it somewhere. I'm a n00b at all that. Right now, i'm just running the standard 500/400 rates.

oh yeah? i wonder if they'd take mine in trade. i talked to myles and, at the time said 600frt and move the 500's to the rear, was as stiff as he'd recommend.

sdkim7

10-20-2008, 09:22 PM

wait a little while and mine will be for sale lol. i need an upgrade to compete.

tranny wise...no 6spd because i did the diffs are 5spd specific. probably due ppg gears.

Well, if you think about selling them later on, let me know. Although the wife will probably chop my balls off for sure ;-)

wgnths

10-20-2008, 09:54 PM

oh i will be. we'll see how they do at the next few events, but i plan on doing a big upgrade for next season, for sure.

wgnths

11-03-2008, 04:44 PM

ta da! almost finished...goodspeed graphics are being redone this week. otherwise, just the oil accumulator and some tuning/alignment. after super lap, i'd like to start figuring out a splitter setup.

thanks to joe for all the hard work put into this, and for getting a motul sponsorship.

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7253.jpg

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7237.jpg

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7242.jpg

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7283.jpg

sdkim7

11-03-2008, 08:02 PM

Car looks awesome! Can't wait to see what kind of numbers it throws down. Congrats for sure!

speedblind

05-28-2009, 04:24 AM

How can I buy what you're selling? Is it safe to post my credit card number and social security number?

kthx

wgnths

05-28-2009, 02:30 PM

How can I buy what you're selling? Is it safe to post my credit card number and social security number?

kthx

Buy what who is selling? And do not post any cc# or ss info on here!

moxie

05-28-2009, 02:58 PM

He meant the spammer I have removed.

They are getting more cleverered.

wgnths

09-11-2009, 03:30 PM

guess i'll update this thread too, since it's changed a bit.

http://img.photobucket.com/albums/v304/spoolnv/wagon/HW9D5943.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/511516467_yf6pE-XL.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/511516443_LQMru-XL.jpg

wgnths

09-11-2009, 03:35 PM

And as of the last 2 weeks:

http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7753.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7755.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/IMG_7761.jpg

Cage work by Fathead Fabrications:

http://img.photobucket.com/albums/v304/spoolnv/wagon/DSC02049.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/DSC02053.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/DSC02055.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/DSC02056.jpg
http://img.photobucket.com/albums/v304/spoolnv/wagon/DSC02057.jpg